Introduction

Energy from every particle

Energy from every particle: undersize coke, anthracite and coal particles will no longer have to end up in the air or trapped in filters. Our EcolBriq® technology enables you to recycle every waste particle. Our Energy C-Charge made from 0–40 mm particles can replace up to 5% of primary feedstock.

RECYclable waste

C-CHARGE

use the undersize particles resulting from production and handling of feedstock

Production and handling
up to5%
materials
cannot be used directly
Production and handling
Thermal process
up to25MJ/kg
heating value
of C-Charge
Thermal process
Energy and carburisation
100%
use of undersize particles
Energy and carburisation
Undersize particles
0-40mm
particle size
of material
Undersize particles
C-CHARGE
0
dust
C-CHARGE

Energy from dust

Using our EcolBriq® technology, we cold process your undersize coke, anthracite and coal particles to energy and carburising briquettes. Our Energy C-Charge is suitable for heating plants, thermal power stations and applications involving the burning of coal, coke and anthracite. In metallurgic and reducing atmosphere processes, undersize particles may be included in a multi-component C-Charge to function as a carburiser.

RECYCLABLE WASTE

Customized for you

We calibrate C-Charge briquettes to your requirements to match the available waste, furnace type and feedstock. C-Charge improves the permeability and operation of your furnace thanks to its quality.

  • Excellent strength/meltability ratio
  • Low furnace filter loads
  • Low binders and additives content
  • Recycling of dust and solid waste (0 – 40 mm size of usable material)

Your own C-Charge within 3 months

2
Week
Analysis

We take a sample of between 100 kg and 1 ton of your material for preliminary testing and experiments. We look for optimum production processes.

5
Week
First samples

We develop your customized C-Charge solution. This usually means about 5 different types of briquettes for each intended batch.

10
Week
Testing

We test the first samples at your plant and we fine tune the solution to your needs.

15
Week
Final product ready to roll

We start mass producing your briquettes made to your requirements on our production line.

2
Week
Analysis

We take a sample of between 100 kg and 1 ton of your material for preliminary testing and experiments. We look for optimum production processes.

5
Week
First samples

We develop your customized C-Charge solution. This usually means about 5 different types of briquettes for each intended batch.

10
Week
Testing

We test the first samples at your plant and we fine tune the solution to your needs.

11
Week
Design of your production line

We design a production line tailored to your production operation.

16
Week
Manufacturing of your production line begins

The first parts of your automated line are produced.

16–50
Week
Your production line is installed

At the end of this time, your production line is in place and set to go.

53
Week
Mass production

Begin production of your own C-Charge on your own line commences.

We estimate the value of your waste

Tell us what type of waste your plant generates, and we will come up with a solution according to your requirements. We create your unique C-Charge briquette.

Contact us

Contact us